Author: Nazrul Islam

5 Ways To Fix USB Port Not Working on Linux 2025
5 Ways To Fix USB Port Not Working on Linux – If you have connected a USB flash drive, keyboard, or mouse to your Linux PC. Nothing happened, but maybe you’re confused about what’s going on right now. Why is your Linux computer not detecting the device? Is this a Linux problem, or has your USB device stopped working? Here are the steps to fix the USB port not working on Linux

5 Ways To Fix USB Port Not Working on Linux

How To Fix USB Port Not Working on Linux

Disk drives, card readers, phones, media players, and media peripherals. All of them are useful, but if there is a problem with your USB port or system drivers, it won’t work. This can be very frustrating if you use a Bluetooth keyboard or mouse (with a USB dongle) because it means digging for wired USB alternatives.

Read more:
However, it may not be a non-working port. Maybe the USB device you are using has developed an error and cannot be detected. Dealing with USB issues can be tricky, but it’s not impossible to diagnose the error and make the necessary repairs. There are five steps to follow to fix USB problems on Linux:
1. Confirm the USB port is detected
2. Make necessary repairs to the port
3. Repair or repair USB device
4. Restart your Linux operating system
5. Confirm the presence of the device driver
Let’s look at each of these in turn and learn how to handle dodgy USB devices in Linux.

#1. Is Your Device Detected By Linux?

The first thing to check after inserting your USB device into a Linux computer is to check if the device is detected. USB device detection is usually not as verbal or audible as in Windows or macOS, which means that you should frequently check that the device has been picked up by the operating system. Fortunately, it’s simple.

Is Your Device Detected By Linux

First, remove the USB device you asked about. Then, open a terminal window and enter the command “list USB”:
```
lsusb
```
Record the results, then connect the USB device, and run lsusb again. This time, you will see additional devices listed, with Bus ID, Device ID, USB ID, and description. If you can’t figure out the enhancement (you might have an internal USB device, maybe Ethernet), try a different command.
```
dmesg | grep -i USB
```
The dmesg command will list the USB devices connected to your system. It will also cover non-USB hardware, but unfortunately offers a lot of information. To solve this, you can try
```
dmesg | less
```
Finally, you can count on a more user-friendly one
```
usb-devices
```
It’s like a cross between the dmesg and lsusb commands, listing connected USB hardware with enough information to identify them. So, is the USB you guys connected to listed here? If not, then maybe the port is damaged or there is a problem with the device. Similarly, the device may not be compatible with Linux.

#2. How to Check USB Port

If the USB device doesn’t show up, it could be caused by a problem with the USB port. The best way to quickly check is to use a different USB port on the same computer. If the USB hardware is now detected, then you know you have a problem with the other USB port.

If other USB ports are not available, you should try USB devices on another PC or laptop. However, this may not be ideal, as you may only have a Windows or macOS computer as an alternative.

Since some USB devices are unusable on Linux, it will be difficult to tell whether it is a USB device or a USB port that is causing you problems. For best results, if possible stick to Linux-compatible hardware when troubleshooting USB devices.

#3. Repair Damaged USB Hardware

If your USB device is damaged, you have two options: repair or restore. A repair usually involves checking USB ports, as well as devices that are currently not working. Repairs will almost always center around USB cables, and ports on your computer.

However, USB cables can usually be replaced, while ports can be repaired. Physical inspection of the USB device is a good idea. The cable must be sturdy, without splitting; plugs must be solid, with metal parts firmly attached.

USB ports, meanwhile, should be checked with your PC turned off, and disconnected from the mains supply. Check if the port is plugged in correctly; a wobbly USB port is an indication of shabby hardware.

If the USB port is loose, you may be able to solder it back into place. Of course, you should already know how to solder, never try a DIY job without prior experience. Also, check for dust and dirt on your USB ports, especially those on the back of your PC where dust collects regularly.

Dust is the enemy of PCs, so it’s a good idea to keep your system in a dust-free environment to boost performance. Since dust can enter your PC via the USB slot, take the time to keep this port clean. Use compressed air to remove dust and dirt.

Can you restore your USB device? If the device is new, then maybe. The problem is, unless it’s explicitly labeled as running on Linux, then, the retailer is unlikely to accept returns. You may need to be a little selective with the facts you share with them.

#4. Restart Linux To Fix the USB Port

In some cases like if you are using a laptop the power issue might affect its ability to detect USB devices. The auto-suspend setting is designed to reduce power usage on Linux laptops, but it can prove counterproductive. So, what can you do?

First, check if auto-suspend is causing the problem. You can do this by rebooting your computer, if the USB device is working, then the USB port is receiving power. The next step is to make sure this doesn’t happen again. The following command line tricks are for both Ubuntu and Debian, so check the correct procedure on your Linux distribution of choice. Open a terminal window and enter:
```
cat /sys/module/usbcore/parameters/autosuspend
```
It should return a value of 2, which means auto suspend is enabled. You can fix this by editing the grub file. Enter:
```
sudo nano /etc/default/grub
```
Restart Linux To Fix USB Port

Here, search
```
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
```
Change this to
```
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash usbcore.autosuspend=-1"
```
Press Ctrl + X to save the file, and exit. Next, update-grub:
```
sudo update-grub
```
When that’s done, restart Ubuntu. After rebooting, log into your account and enter the cat command again:
```
cat /sys/module/usbcore/parameters/autosuspend
```
This time, the value returned should be -1. You have disabled auto suspend, so USB devices connected to your laptop shouldn’t fail due to power issues.

#5. Checking USB Device Driver In Linux

Once upon a time, USB devices didn’t often work on Linux. Only devices manufactured by OEMs interested in Linux (perhaps they use it for development) offer Linux drivers. Today, things are very different, with most manufacturers offering Linux drivers.

In most cases, it is already available on your Linux operating system, via the kernel. You don’t need to install any USB drivers. If the driver is not available, you may be able to find it by contacting the USB device manufacturer.

Read more:
Conclusion:

Following the steps above can solve the problem of the USB port not working on your Linux PC. But with built-in drivers and broad support for various types of USB devices, it should be easy to diagnose problems with your computer’s USB hardware. While faulty hardware may need to be repaired or exchanged, software repairs are also available.
April 6, 2025
3 Ways to Send Large Files or Videos to WhatsApp 2025
3 Ways to Send Large Files or Videos to WhatsApp – The WhatsApp application allows you to exchange any content with the person you are talking to. And while some images or GIFs are easy to send, some larger files may not be able to be sent.

How to Send Large Files or Videos to WhatsApp

However, there are various tricks to send large files in your WhatsApp conversations and we present them to you below.

Read more:
Just follow the easy steps in How to Send Large Files to WhatsApp.

Due to WhatsApp’s file size limit, you need some tips for uploading large video files. Here we offer two alternatives that will help you to send videos larger than 16 MB to WhatsApp.

#1. Google Drive

The first and probably best way to send large files, large videos on WhatsApp that you can use is Google Drive.

Yes, you can download and share great videos on WhatsApp using Google Drive links.

How to send large files using Google Drive:

Step 1: Open Google Drive on your phone and click on the ‘+’ icon on the Home screen. It will show you several options and press ‘ telecharger‘.

Step 2:  After that, your file will be uploaded to Google Drive. Now in the menu with three dots next to this file and the target option that will appear, select the ‘  Copy link  ‘ option.

Step 3: Now open WhatsApp and go to the conversation of the person with whom you want to share the file. In the text field, paste the link and submit.

The Google Drive link will allow your contacts to view files and even download them.

#2. WeTransfer

WeTransfer is an App that can help you share large files via a link that can be shared with anyone.

The app is easy to use and supports most file formats. The free version allows you to upload files up to 2 GB and if you want the pro version you can share up to 20 GB.

Follow these steps to transfer files via WeTransfer:

1.  Go to the WeTransfer website.

2  . Click Add your file and browse for the file, download it and click Open.

3.  After adding the file, click  “Download Link” to get the shared link.

4. Now click on “Copy link”  then paste it into WhatsApp chat to share it with your contacts.

Your contact can then open the link and download the file using the WeTransfer website.

#3. Video compressor

You can also use a video compression application to compress the video to the recommended size and then send it.

This application will not only reduce the size of the video but also convert it to all formats. Here we use the “UniConverter” software for Windows.

How to compress video size for WhatsApp

1.  After installation, launch the software and the  Convert  Default tab will open.

2.  Click  Add Files or you can also drag and drop the file.

3.  Tick  Convert all files to the top right corner and select your phone from the drop-down menu.

You can also select the video format in the  Video language.

4.  Now click  Compress and select the file size, resolution, and bit rate for video compression.

5.  Click the  Convert All option at the bottom to finish the compression.

Finally, find the compressed video in the Cover tab and transfer it to your phone to send via WhatsApp.

Conclusion:

So, friends, This is the explanation for 3 ways to send large files or videos to WhatsApp, You can use any of the listed Ways to Send Large Files to WhatsApp to share files on the platform.

Let us know in the comments which of these 3 ways to send large files, and large videos on WhatsApp is the most suitable for you. Also, if you have any questions, ask us in the comments below.
March 29, 2025
How To Fix Boot Loop In Windows 10 Laptop PC 2025
How To Fix Boot Loop In Windows 10 Laptop PC – In previous versions of Windows if it fails to boot maybe we need a full reinstall to fix it. But in the Windows 10 version, the reboot loop can be completed relatively quickly.

How To Fix Boot Loop In Windows 10 Laptop PC

How To Fix Boot Loop In Windows 10 Laptop PC

Here’s how to fix a boot loop in Windows 10 and get your PC or laptop up and running in minutes.

Read more:
What is Infinite Boot Loop?

Windows 10 isn’t particularly prone to infinite boot loops, but that’s not unheard of. It’s easy to spot, especially by Windows’ failure to load properly after turning on your computer. Otherwise, the computer will fail to reach the login screen before resetting to the boot screen and attempting to reload Windows. Now caught in an infinite loop booting and crashing.

This error occurs because of a problem with the Windows system registry. Unfortunately, without booting into Windows, the registry cannot be repaired. This is called a Catch-22 situation. To solve this problem, use the Windows 10 Recovery option.

What Causes the Windows 10 Boot Loop?

The Windows 10 reboot loop can be frustrating to deal with. But what caused it? Usually, the error can be traced to one of three things:
1. Windows Update
2. Updated or new Windows drivers
3. New software installation (app or game)
Something in the process went awry. The result is a computer caught in an infinite reboot loop. This is a problem that has plagued Windows for years. But don’t worry, there are some tips to fix the boot loop in Windows 10.

Wait for Windows 10 Automatic Repair Boot Loop Repair

If you’re lucky, the Windows Repair or Automatic Repair feature might come in without being asked by you. Usually, this will only happen after a few reboots, so give your computer some time to get to this stage. Some manual interaction may be required, use the Automatic Repair option here and follow any steps. However, if this hasn’t happened in 15 minutes, it probably won’t.

Access Safe Mode to Fix Windows 10 Endless Boot Loops

Three other options are available to fix the infinite boot loop in Windows 10:
- Safe Mode: this allows you to access the operating system and uninstall the software, driver, or Windows Update that is causing the error
- System Recovery: a quick way to undo recent changes
- Reinstall Windows 10: last option, is to use when nothing else is working or you don’t mind losing data.
Accessing Safe Mode will depend on how the boot loop is presented, as well as your system settings.

#1. Windows Dual Boot System

If you have multiple versions of Windows installed on your computer, wait for the OS selection screen to appear. When given a choice, make sure you choose Change defaults or choose other options. Then follow the steps above to access Safe Mode.

#2. Access Safe Mode Manually

In some cases, you will be able to access Safe Mode from within Windows 10. This will be possible if a reboot loop is triggered on launching an app or certain connected hardware. Before the reboot is triggered, you have three options to reboot Windows 10 in Safe Mode:
- Hold Shift then Start > Restart to boot Windows 10 into Advanced startup options.
- You can also open Settings (press WIN + I) then Update & Security > Recovery > Advanced startup > Restart now.
- In the Command Prompt (search for cmd in the Start menu, then right-click and select Run as administrator ) enter shutdown /r /o to reboot the computer into Advanced Boot Options.
As mentioned, you may not need long to enter the command. The first option is probably the fastest.

#3. Using Installation Media To Access Safe Mode

Windows 10 users should have a recovery partition on their PC’s hard disk drive. Otherwise, a recovery USB drive or DVD can be created by downloading the Windows 10 installation media.

Note that this must be created on a different computer. With Windows 10 stuck in a reboot loop, all you need to do is insert the installation media. Alternatively, access UEFI/BIOS (tap Del, F8, or F1 when the system boots) and find the boot manager.

Select the recovery partition as the primary device and then restart the computer. These two methods should have walked you through the Automatic Repair tool, or given you access to the Advanced options screen.

Fix Infinite Boot Loop in Windows 10 Safe Mode

With the computer in Safe Mode, you can take steps to prevent further boot loops. This can be anything from uninstalling drivers to uninstalling Windows Update in the Command Prompt.

Solving Windows Update-Based Boot Loops

In the Command Prompt (which you have to open as Administrator on the desktop) enter
```
net stop wuauserv
```
Follow this with
```
net stop bits
```
Wait for a response, then browse to  C:\Windows\SoftwareDistribution. Here, delete all the contents of the directory.

But if you can only access the Advanced options screen, use the Command Prompt. This is also an option in Safe Mode. When you restart Windows 10, it should boot as usual.

Our Apps/Games Causing Boot Loops In Windows 10?

Maybe you should suspect that the boot loop is caused by the installation of an application. Maybe it’s a game you just installed. However, this can be resolved by uninstalling the software. Just find the software in the Start menu, right-click it, and select Uninstall. When you restart Windows 10, the boot loop should be fixed.

Stop Hardware Driver Boot Loops

If the system is in a boot loop due to hardware drivers, this can also be solved in Safe Mode. Right-click Start and select Device Manager.

Here, look for the suspect device. Usually, this will be something you just added, though not always.

Right-click the device, select Properties > Drivers, and select  Roll Back Driver.  If this doesn’t work, disable it, and uninstall the driver.

With the device selected, right-click and select  Disable Device, then  Uninstall Driver. Then you can restart Windows 10.

Restore/Reinstall Windows 10 To Fix Infinite Boot Loop

If you can’t access Safe Mode, or the fix doesn’t work, the best solution is to use the refresh option. You may also have to reset Windows 10 back to factory settings. This process basically reinstalls Windows 10 for you. Remember to always back up your personal data first!

Did You guys Fix the Windows Boot Loop?

Reboot loops have long been a problem with Windows. While previous versions offered several solutions in recovery options, this solution is far from comprehensive. Luckily, Windows 10 has great recovery tools and makes boot loop problems easy to deal with.

While following the steps outlined above, please be careful to follow them exactly. The error you made while using the command line interface cannot be undone.

If you’re lucky enough to recover from Windows 10’s infinite boot loop, it’s time to take precautions against the things you already know can make boot loops happen.

Read more:
Conclusion:

That’s an article on How to Fix the Boot Loop on Windows 10, Wait for other interesting articles, and don’t forget to share this article with your friends.
March 29, 2025
15 Best File Manager Apps For Android Phone Device 2025
15 Best File Manager Apps For Android Phone Devices – If you are an Android user, surely you need the best file manager app. Using these applications can help you browse files in the system, allocate and manage storage memory, and move and copy files and other things from one particular location to another. For this reason, this article will discuss some of the best file manager applications on Android that you can try.

15 Best File Manager Apps For Android Phone Device

15 Best File Manager Apps For Android Phone Devices

Several smartphone manufacturers have provided a built-in file manager application in each of their products. However, some users feel that the application has not met their needs in managing files. Therefore, they try to find the best file manager app to meet their expectations.

Read more:
In this review, you will get to know about the best file manager apps for the android platform and their internal specifications, user interface, quality, and ease of access. Here’s a list of the best file manager apps on Android for free.

#1. AMAZE FILE MANAGER

Download QR-Code

Amaze File Manager

Developer: Team Amaze

Price: Free ⁺

For people who want an open-source and lighter experience on file browsing, Amaze file manager will meet your expectations. The app is still relatively new, but Amaze has a nice user interface and file access.

This file manager’s main attraction and uniqueness is the app design, built-in SMB file sharing feature, app management feature for all systems and the third-party installed apps, root explorer, cache, and junk file cleaning facility.

#2. X-PLORE FILE MANAGER

Download QR-Code

X-plore File Manager

Developer: Lonely Cat Games

Price: Free ⁺

The quite precise and professionally driven user interface which contains the best file manager app is X-plore file manager. It provides a multi-tasking facility in the form of a dual-pane file exploration feature so that you can access two individual windows at one time.

This app is completely ad-free. As the name suggests, X-Plore has more additional features like a built-in PDF viewer, ZIP unpacker, hex viewer, and video player with subtitle attachments, and also has LAN connection, cloud storage as well as root support.

#3. ASTRO FILE MANAGER

Download QR-Code

ASTRO Dateimanager

Developer: App Annie Basics

Price: Free

The nostalgic app has its own reputation. Of course, this is Astro File Manager for Android. Anyone you can ask is a solid choice for organizing your files. The app developers keep updating this app and adding some additional features like SD card support, file compression, archive extraction support, and internal app management with cloud storage. This application has a unique and attractive high-user interface and ease of use.

#4. ASUS FILE MANAGER

Asus File Manager is made for the Zen user interface with Asus-made smartphones. Asus File Manager is a free application to access but contains ads. Attractive and awesome user interface with ease of use where multiple categories are displayed perfectly. Associated files are easy to retrieve and also have a recycle bin option so you can recover deleted files once again. This file manager app also contains LAN and SMB access, cloud storage, compression, and file extraction and has options to secure your confidential files.

#5. FX FILE EXPLORER

Download QR-Code

FX File Explorer: the file manager with privacy

Developer: NextApp, Inc.

Price: Free ⁺

An ordinary file explorer with compromised quality features. FX File Manager’s varieties of functions include media and file allocation management, multi-window support, FTP transfer, and encrypted file management.

Additional features like a built-in text editor and archive support for GZip, Bzip2, and 7zip. The best thing about this app is that it has no ads and it will be a better replacement for your old file manager.

#6. ES FILE EXPLORER FILE MANAGER

The most beautiful-looking and well-known file manager application for the android platform is ES File Explorer. This app has a different angle of features where it will cover all the needs of the user.

Some important features for file managers are copy/paste options, a memory space analyzer, and trash to recover available space. Not only that, but ES File Manager also has built-in features for online/cloud storage and also access to the root system. Anyway, this application will really help you in managing files on an Android phone.

#7. MI XPLORER SILVER

This very new and simple file manager is called MiXplorer Silver. Has a lot of features for a file manager application. Features like EPub support, MobiPlacket, and PDF reader as well as file encryption and a bunch of plugins with more functionality like archive and file compression plugins.

#8. TOTAL COMMANDER

Download QR-Code

Total Commander – Dateimanager

Developer: C. Ghisler

Price: Free

Looking for the most useful user-rated file manager application, Total Commander will meet your needs. Total Commander has all the necessary features like folder creation, file control, accessibility, theme change, and an easy-to-use user interface.

Some special plugins like FTP and SFTP clients, WebDAV, and LAN access to share files and gain access to IP addresses. There is also a root explorer access option with multimode and options for managing file orders, bookmarks, etc.

#9. MK FILE EXPLORER

Download QR-Code

MK Explorer (File Manager)

Developer: kormateusz

Price: Free ⁺

Unlike other apps, MK Explorer is the best file manager app which has an interactive material design with compromise features like delete, hide, and copy/paste features with easy accessibility, Although this app will not support cloud storage offline features like a search tool, ZIP extractor and RAR, a built-in text editor, music and video player with support for different languages is enough to make MK Explorer the right choice of file manager application for Android smartphones.

#10. SOLID EXPLORER

Download QR-Code

Solid Explorer File Manager

Developer: NeatBytes

Price: Free ⁺

This popular application comes with important features to meet the needs of its users. Solid Explorer also has an attractive UI design, cloud support, root access, FTP, SFTP, and CIFS support.

The choice of a dark theme with archive and compression support as well as chrome cast support makes the application more unique from the other applications mentioned above. This app is available for free, you can also try its full features after paying a low fee.

Read more:
Conclusion:

We will also provide alternative file manager applications that you should try. Here’s a list of other applications:
1. Root Explorer
2. File Manager
3. Xiaomi File manager
4. Explorer++
5. Cx File Explorer
The above list is the best file manager apps on Android that you are ready to download and install. Please choose one and good luck exploring the application.
March 29, 2025
How To Turn off Touchscreen on Windows 10 PC 2025
How To Turn Off Touchscreen on Windows 10 PC – In this article, we will explain how to disable the touchscreen in Windows 10. The touchscreen is a very useful feature, but sometimes you may want to disable it for some reason.

How To Turn off Touchscreen on Windows 10 PC

How To Turn off Touchscreen on Windows 10 PC

Caution: Do not disable your Touchscreen if it is the only input method for your device. If the keyboard and mouse don’t work on your laptop 2-in-1 device or a tablet without a keyboard accessory, don’t turn off the Touchscreen. You cannot reactivate it without connecting to another type of input device.

Read more:
The touchscreen can be disabled in Windows 10 via the Device Manager, which you can access via the Control Panel or directly from the search box on your taskbar.

The device manager is where Windows 10 keeps track of all your devices, and also where you can disable or enable any device connected to your computer.

Here’s how to disable the touchscreen on a Windows 10 laptop:

1. Select the search box on the taskbar.

2. Type Device Manager in the search box.

3. Select Device Manager in the list of search results.

4. Select Human Interface Devices.

5. Select HID-compliant touch screen.

6. Select Action in the upper left corner.

7. Select Disable Device in the drop-down menu.

8. Select Yes if this warning is displayed: Disabling this device will cause it to stop functioning. Do you want to disable it?

9. Make sure your touchscreen is disabled.

Note: To turn the touchscreen back on, follow the same steps as above and select Enable in the Action drop-down menu in the Device Manager window.

Reasons to Turn Off Touchscreen

The touchscreen input is most useful on tablets and 2-in-1 devices.

If you find that the touchscreen on your traditional laptop is more confusing and less useful to you, turn it off.

Another reason to disable the touchscreen is to prevent children from touching the screen while you’re trying to watch a video or get work done.

Also, in some cases, the screen doesn’t work and behaves as if you were touching it when you weren’t.

Read more:
Conclusion:

Turning off a Windows 10 laptop touchscreen works the same way on all types of devices, including laptops, desktops, tablets, 2-in-1 devices, and computers from manufacturers such as HP, Asus, Acer, Lenovo, and Dell.
March 29, 2025