Category: Windows

Windows – Here you can find Computer-related updates Windows 10, Windows 8, Windows 7, Linux, technology information, and more.

8 Ways to Fix The Hosted Network Couldn’t Be Started in Windows 10 [2024]
8 Ways to Fix The Hosted Network Couldn’t Be Started in Windows 10 PC – The error message “ The hosted network couldn’t be started ” can occur when Windows 10 users set up a WiFi hotspot via the command prompt. Usually, the problem is caused by the WiFi network adapter. But don’t worry! Because the admin has the answer to fix it. In this post, I will show you how to solve the hosted network that couldn’t be started on Windows 10.

8 Ways to Fix The Hosted Network Couldn’t Be Started in Windows 10

What is the Error Message The Hosted Network Couldn’t Be Started?

Internet Connection Sharing (ICS) is one way to turn a PC into a mobile hotspot. PC tethering helps to solve your router problem which only has a limit of users that can connect at the same time. The process can be done through settings. However, using the Command Prompt is the most popular way to set up a hosted network.

Read more:
The name itself implies that your computer serves as the “host” of your Wi-Fi network and that other devices can connect to and through it. In Command Prompt, the hosted network is started first by activating the mobile hotspot feature: netsh wlan set hostednetwork mode=allow ssid=” HotspotName” key=” password”.

The words in quotes will be replaced with whatever name you choose for the PC hotspot and the password you choose respectively. After that, you usually proceed by starting the hosted network with the following command: netsh wlan start hostednetwork.

This is where the problem arises for most people. Usually, after executing the above command, the user receives the error message “ The hosted network started ”. However, with this error, the feature does not start and the Command Prompt issues the following error notifications: “ The hosted network couldn’t be started ” and “ The group or resource is not in the correct state to perform the requested operation “.

Sometimes, the error message is slightly different, but basically, the cause remains the same. Here are some other error messages from this nasty network error notification:
- The hosted network couldn’t be started a device attached to the system is not functioning
- Microsoft hosted network virtual adapter missing
- The hosted network couldn’t be started because the wireless local area network interface is powered down
- Can’t find Microsoft-hosted network virtual adapter
- Microsoft hosted network virtual adapter not found in Device Manager
- As they are all the same, the same solution applies to all of them.
Note that this error usually means that the Microsoft Hosted Network Virtual Adapter, which plays an important role in PC network sharing, is missing, corrupted, or disabled. Out-of-date or out-of-date Wi-Fi, drivers can also cause this annoying problem. The wrong driver configuration also does not rule out the possibility. But you don’t need to worry, because the admin will tell you how to solve the hosted network that couldn’t be started on Windows 10.

How to Fix The Hosted Network Couldn’t Be Started

If there is a bug in Windows, of course, there will be a solution. The error message “ The hosted network couldn’t be started ” in Windows 10 is no different in this regard. The admin has collected several solutions that you can use to solve this problem.

#1. Check the WiFi Connection

You can’t use the internet through a wireless router, let alone a hosting network, if your WiFi is turned off. Sometimes we unconsciously ignore the fact that there are times when we need to manually set up a WiFi connection on our computer by clicking on the network icon on the right side of the taskbar. Also, check if you turned on airplane mode by mistake. It can also verify that the WiFi network is working.

#2. Check PC Supports Sharing

You can’t set up a mobile hotspot if your PC doesn’t support hosted network sharing. To check, follow the instructions below:

Check PC Supports Sharing
1. Press the Windows key + R to open the Run dialog box.
2. Type ” cmd ” in the dialog box then press CTRL + SHIFT + Enter to open a Command Prompt with admin privileges.
3. Enter the command “ NETSH WLAN show driver ” in the Command Prompt window, and press the Enter key. It tells you whether your PC or laptop supports a Hosted network.
#3. Run Network Adapter Troubleshooter

The Network Adapter Troubleshooter may be able to provide a fix for the “ The hosted network couldn’t be started ” problem. For that, you can try to use the troubleshooter in Windows 10. Follow the steps below to do it:

Run Network Adapter Troubleshooter
1. Type “ troubleshoot ” in the Windows search bar and select the most suitable one.
2. Then click on the Additional Troubleshooter section.
3. Go to the Find and fix other problems section then select Network Adapter and click Run the troubleshooter to open the troubleshooter window.
4. The troubleshooter then presents a selection of network adapters for repair. Select the All network adapters or WiFi option.
#4. Check WiFi Network Sharing Settings

If you want to enable a hosted network on your computer, it means you want to use the machine as a “hub” for other devices to connect to the internet. Of course, that option must be enabled first on your PC, otherwise, it won’t work.

Now, the feature, or rather the network sharing option, is enabled by default. However, if all your attempts to get network sharing up and running proved to be unsuccessful, the feature may have somehow been disabled. Re-enabling the option might solve this problem once and for all:

Check WiFi Network Sharing Settings
1. Press the Windows key + R then enter “ ncpa. CPL ” in the Run dialog box, and press the OK button.
2. Right-click the network for which you want to enable sharing and select Properties from the context menu
3. Click the Sharing tab and then check the box Allow other users to connect through this computer’s internet connection.
4. Also, check the option Establish a dial-up connection whenever a computer on my network attempts to access the internet which is included in the Sharing tab of Windows 8.
5. Press the OK button to confirm the setting.
#5. Check Power Management Settings

Some users reported that they fixed the “ The hosted network couldn’t be started ” issue in Windows 10 by enabling the power management feature built into the network adapter. So maybe this method can solve your problem. There’s no harm in trying, at least. Follow the instructions below to try it out:

Check Power Management Settings
- Open the Run dialog box by pressing Windows Key + R and typing “ devmgr.msc ” (without the quotes). Press the Enter key or click OK.
- When the Device Manager window opens, navigate to the network adapters section and double-click to expand it.
- Right-click the problematic WiFi network adapter and select Properties.
- In Properties, click the Power Management tab.
- Check if the “ Allow the computer to turn off this device to save power ” option is enabled. If it’s disabled, enable it.
- Click OK and exit all windows.
#6. Enable Microsoft Hosted Network Virtual Adapter

To use your PC as a mobile hotspot on Windows 10, you need a Microsoft Hosted Network Virtual Adapter. It must be present and enabled for the hosted network feature to work properly. If disabled, it can give an error message “ The hosted network couldn’t be started ”. You can check if the Microsoft Hosted Network Virtual Adapter is enabled or not and turn it on if needed. Follow the steps below:

Enable Microsoft Hosted Network Virtual Adapter
1. Press the Windows key + R . Type “ devmgmt.msc ” in the Run dialog box and click the OK button.
2. Now click View in the Device Manager window.
3. Select the Show Hidden Devices option.
4. Double-click Network adapters, which will now include the Microsoft Hosted Network Virtual Adapter.
5. Right-click the Microsoft Hosted Network Virtual Adapter and select the Enable device option.
#7. Reset WiFi Network

Most problems with Windows can be solved by doing a simple restart. For the problem “ The hosted network couldn’t be started ” in Windows 10, resetting the WiFi network can work fine. To reset the problematic network, you must first disable it, wait a moment, then reactivate it. Hopefully, this action resolves the issue so you can continue using the sharing feature on your PC. Here’s how to do it:

Reset WiFi Network
1. Press the Windows key + R then enter “ ncpa.cpl ” in the Run dialog box and click OK.
2. Right-click your WiFi connection and select Disable.
3. Wait a minute or two, then select the Enable option in the WiFi connection context menu.
#8. Update the Network Driver

The error message “ The hosted network couldn’t be started ” may also be caused by an incompatible or corrupted WiFi driver. So updating the WiFi network adapter driver is a way worth trying. You can update drivers with third-party software or use Device Manager’s Search automatically. Here’s how to do it:

Update Network Driver
- Press the Windows key + X to open the Quick Access menu and select Device Manager.
- In the Device Manager window, look for Network Adapters and expand it. Right-click the Wi-Fi adapters that are giving you problems and select Update Driver.
- In the next window, select the “ Search automatically for updated driver software ” option.
- Windows will start a search for the required drivers and install them if they are available. Otherwise, it will tell you that the current driver is the latest one.
Read more:
Conclusion:

So those are some ways to fix the hosted network that couldn’t be started on Windows 10. If all the methods above still don’t solve the problem, you can use a third-party application such as Connectify or Free Wi-Fi Hotspot to create a mobile hotspot.

But supposedly with the solutions provided in this guide, you can solve that problem and successfully share your network via PC or laptop.

Don’t forget to bookmark and always visit every day Technowizah.com because you can find here the latest Tech Computer Android games How-to Guide Tips&Tricks Software Review etc, Which we update every day.
July 20, 2024
9 Ways to Fix “Wi-Fi Doesn’t Have Valid IP Configuration” 2024
9 Ways to Fix “Wi-Fi Doesn’t Have Valid IP Configuration – See the error “Wi-Fi doesn’t have a valid IP configuration” in Windows 10. This problem is frustrating because it prevents us from going online. This time we will explain why you are seeing the error message that Wi-Fi doesn’t have a valid IP configuration and how to fix it so you can connect again.

9 Ways to Fix “Wi-Fi Doesn’t Have Valid IP Configuration”

What is an Invalid IP Configuration?

Before we get to the fix, it’s good to know a little about why this error appears. In short, when you connect to Wi-Fi, your router assigns an IP address to your computer so it can go online. If something goes wrong with the IP configuration, your computer and router will not be able to communicate.

Read more:
For example, your computer may try to use a different IP than the router expects. This prevents you from reaching the internet, and results in a “does not have a valid IP configuration” error. Let’s see how to fix this problem.

Fixed “Wi-Fi Doesn’t Have Valid IP Configuration”

#1. Restart Your Computer

As with most problems, your first troubleshooting step should always be restarting your computer. You may see a temporary “Wi-Fi doesn’t have a valid IP configuration” message. Before you spend time on more intensive fixes, you should do a quick restart to start off clean. If you reboot and still see this error, continue.

#2. Reboot Your Router

Another simple fix for network problems is restarting your wireless router. Since this error involves the router assigning an IP address to your computer, it may be having problems. Like rebooting your computer, restarting your router will remove any short-term annoyances and make it start again. If you still can’t get online after cycling all the equipment, then you need to go to the next step.

#3. Release and Renew Your IP Address

Using the Command Prompt tool, you can provide your computer’s current IP address and request a new one. This is a good way to clean up the invalid IP configuration problem. To do this in Windows 10, right-click on the Start button or press Win+X to open the Power User menu. Select Command Prompt (Admin) or Windows PowerShell (Admin) from the list to open the command line. At the command line, type the following and press Enter :
```
ipconfig /release
```
This tells your computer to release the current IP address back to the pool of available addresses on the router. Next, enter this command (press Enter to send it) to request a new address:
```
ipconfig /renew
```
Release and Renew Your IP Address

#4. Reset Network Protocol

You can also use the command line to reset Winsock, which is a specification that details how your computer accesses the network. Open an administrator Command Prompt or PowerShell window as described above, then run the following commands one by one:
```
netsh winsock reset
```
```
netsh int ip reset
```
Try to get online again afterward.

#5. Check the Manual IP Address Setting

By default, your computer and router use a protocol called DHCP (Dynamic Host Configuration Protocol) to assign IP addresses to your system without manual intervention. If you have assigned a static IP address in the past and something changes, this can cause the “Wi-Fi Doesn’t Have a Valid IP Configuration” error.

To check this, open Settings ( Win + I shortcut  ) and browse to  Network & Internet > Status. Here, select Change adapter options.  In the box that appears, double-click on your Wi-Fi connection. You will see a new window containing information about your connection. Click  Properties at the bottom, then double-click Internet Protocol Version 4  from the list of options. This will open the properties window, where you can change the IP settings.

Most people should select the Obtain an IP address automatically button. If you have used the following IP addresses enabled with the addresses listed below, try changing this to automatic and hit  OK. Then see if you can get online with these changes.

Check Manual IP Address Setting

#6. Update Your Wireless Drivers

Since the “Wi-Fi Doesn’t Have a Valid IP Configuration” error involves a wireless connection, you should make sure the driver your computer uses for Wi-Fi is working properly. To do this, press  Win + X  again and select  Device Manager. Go to Network adapters and find your list of wireless drivers. Right-click and select Update driver > Search automatically for updated driver software.

It may not find the new driver. In that case, you can right-click the device name and select Properties to see who made it (likely Intel or Realtek). You may be able to find an updated driver version on the hardware provider’s website.

If that fails, you can right-click the wireless device and select Uninstall device to remove it from your computer. When you reboot, Windows will have to reinstall the new wireless drivers. However, if it doesn’t do this automatically, you’ll have to install it yourself, either using another computer or a wired connection.

#7. Check for Malware And Antivirus Interference

If you have reached this point, it is worth running a malware scan on your computer. Viruses and other malicious programs can sometimes mess up your internet settings to prevent you from going online. While it might not result in this particular “Doesn’t Have a Valid IP Configuration” issue, it’s still worth a try.

Run a scan with Windows Defender or another antivirus that you have installed on your system. If you have access to another computer that can go online, download the free version of Malwarebytes and copy it to the affected computer to run an anti-malware scan. As another troubleshooting step, try disabling your antivirus and trying to get online again. Some third-party antivirus programs can interfere with normal network operation and block your network connection.

#8. Increase the Number of DHCP Users

Increase the Number of DHCP Users

Most routers have a default limit on the number of devices that can connect using DHCP. If you have a lot of online devices at home, there’s a good chance you’ve reached this limit, which causes the “Wi-Fi Doesn’t Have a Valid IP Configuration” error when your computer tries to get an IP address.

You will have to log into your router, find the DHCP settings, and increase the limit to fix this issue. How to do this depends on your router, so I can’t give you exact instructions. Because each router has a different layout of settings.

#9. Reset Network Settings

Reset Network Settings

At this point, you’ve already tried the big fix. You should now reset your Windows 10 network settings, as there might be a deep-rooted issue. Go to Settings > Network & Internet > Status and click  Network Reset at the bottom of the page. Heed the warning that doing this will wipe all your network adapters and reset everything back to default. If you agree with that, click Reset now. This process will restart your PC.

Read more:
Conclusion:

So that was how to fix it. Hopefully, you don’t have to reset all your network settings to resolve the “Wi-Fi Doesn’t Have a Valid IP Configuration” error message. This error is usually a temporary error that goes away with one of the initial steps.

Don’t forget to bookmark and always visit every day Technowizah.com because you can find here the latest Tech Computer Android games How-to Guide Tips&Tricks Software Review etc, Which we update every day.
July 16, 2024
7 Ways to Fix Dxgkrnl Video Fatal Error on Windows 10 PC 2024
7 Ways to Fix Dxgkrnl Video Fatal Error on Windows 10 PC – Are you getting the message “video dxgkrnl fatal error”? This message usually appears because there is a problem with the graphics card. But you don’t need to worry, because there are several methods to fix it.

7 Ways to Fix Dxgkrnl Video Fatal Error on Windows 10 PC

How to Fix Dxgkrnl Video Fatal Error on Windows 10 PC 2024

Windows 10 often has errors, and one of them is the “video dxgkrnl fatal error” message appears. This error usually occurs when your PC uses an outdated graphics driver.

Read more:
However, there is another reason why this error message may appear. Luckily, you have a few workable and potentially fixable video dxgkrnl errors on your PC.

#1. Use Hardware Troubleshooter

As we know Windows 10 is rich in built-in tools, one of which is the hardware troubleshooter tool. It allows its users to find and fix hardware-related problems.

When you see “video dxgkrnl fatal error” on your PC, it’s a good idea to run this troubleshooter to see what problems can be found and fixed. To do so:

Use Hardware Troubleshooter
1. Open the Run dialog by pressing Windows Key + R at the same time.
2. Type the following text msdt.exe -id DeviceDiagnostic and press Enter.
3. On the Hardware and Devices troubleshooter screen, click the Next button.
4. Wait for the troubleshooter to find and fix problems related to your hardware.
#2. Fix Corrupt Files

The most common reason for errors in Windows 10 is a corrupt file. If there are any corrupt core system files on your PC, that might be why you are seeing “video dxgkrnl fatal error”.

In this case, use Windows 10’s built-in corrupt file checker. This is a command you can run from the Command Prompt to find and repair corrupted files on your computer. To do this, follow the steps below:

Fix Corrupt Files
1. Open the Start menu, search for Command Prompt, right-click it and select Run as administrator.
2. Type the command sfc /scannow in the Command Prompt then press Enter to run it.
3. Wait for the command to complete to find and repair corrupted files on your PC. This usually takes quite a while.
#3. Reinstall the Graphics Card Driver Driver

Your Windows 10 PC uses the installed graphics card driver to display items on your screen. If there is a problem or error with this driver, reinstalling the driver can fix the problem. To reinstall the graphics card driver, follow the steps below:

Reinstall Graphics Card Driver Driver
1. Press Windows Key + X and select Device Manager from the menu.
2. Expand the Display adapters menu in Device Manager.
3. Right-click your graphics card in the list and select Uninstall device.
4. Follow the on-screen instructions to remove the driver.
5. Restart your PC.
6. When your PC boots up again, open Device Manager.
7. Click the Action menu at the top and select Scan for hardware changes. This will make the device automatically find your graphics card and install the necessary drivers.
Alternatively, you can download the required drivers from the graphics card manufacturer’s website. Manufacturers such as Intel, AMD, and Nvidia all have graphics card drivers available for download on their websites.

#4. Use System Restore

If you see “video dxgkrnl fatal error” after making changes to your PC, that change might be the cause. In this case, you can roll back to the restore point which will revert all your changes up to the date the point was created.

You can use System Restore on your Windows 10 PC to roll back to a specific point, and here’s how:

Use System Restore
1. Open the Start menu, search for Create a restore point, and select the Best match.
2. Click the System Restore button on the following screen.
3. Select Next on the first screen of the System Restores wizard.
4. On the following screen, select a restore point to roll back. Then, click Next at the bottom.
5. Click Finish to start restoring your PC.
#5. Turn off Fast Startup

Fast startup in Windows 10 allows the PC to boot at a faster speed. This can sometimes cause problems with other elements on the PC. It’s a good idea to turn off this option to see if your issue is resolved:

Update Windows 10
1. Open Control Panel on your PC.
2. Click System and Security in the Control Panel window.
3. Select Power Options on the following screen.
4. Click Choose what the power button does in the left sidebar.
5. Click Change settings that are currently unavailable. This allows you to make changes to the fast startup options.
6. Disable the Enable quick start (recommended) option.
7. Click Save Changes at the bottom to save your changes.
8. Reboot your PC.
#6. Update Windows 10

Running an older version of Windows 10 almost always causes problems, one of which is the “video dxgkrnl fatal error” message. This may be caused by an outdated Windows system. To fix this, visit the Settings app and update your PC to the latest version:

Update Windows 10
1. Make sure your PC is connected to the internet.
2. Press Windows Key + I to open the Settings app.
3. Click Update & Security in the Settings window.
4. Select Windows Update from the left sidebar.
5. Click Check for updates in the right pane.
6. If you see an available update, click Install now to install it.
7. Reboot your PC.
#7. Reset Windows 10

If you still can’t fix the “video dxgkrnl fatal error”, it might be a good idea to reset your PC. This will delete all the settings options you configured and return them to their default settings.

You will get the option to keep or delete the saved files when you start resetting the PC. To do this, follow the steps below:

Reset Windows 10
1. Open the Settings app by pressing the Windows key + I.
2. In Settings, click Update & Security at the bottom.
3. Select Recovery from the left sidebar on the following screen.
4. In the right pane, click Get started in the Reset this PC section.
5. Select Keep my files if you want to reset the PC while saving your files.
6. Select Remove everything to delete all your files and settings.
7. Complete the reset process.
Read more:
Conclusion:

So those are some ways to solve DXGKRNL VIDEO FATAL ERROR on Windows 10. If you ever get this error message, don’t panic. This problem can be fixed in most cases, and basically, you just need to apply some standard fixes. The guide above will help you do just that.

Don’t forget to bookmark and always visit every day Technowizah.com because you can find here the latest Tech Computer Android games How-to Guide Tips&Tricks Software Review etc, Which we update every day.
July 15, 2024
3 Ways to Check MBR or GPT Partition Type in Windows 10 [2024]
3 Ways to Check MBR or GPT Partition Type in Windows 10 – You may not need to know which partition scheme your hard disk is using in most cases. However, if you have just assembled a new PC, you may be asked to choose between MBR and GPT partitions.

3 Ways to Check MBR or GPT Partition Type in Windows 10

How to Check MBR or GPT Partition Type in Windows 10 [2024]

In addition, some software needs to determine the partition scheme before the installation process. Therefore, you need to know how to check the MBR or GPT partition type on your Windows operating system.

Read more:
Maybe you’ve tried installing Windows 10 on a new computer and you came across an error message that says ‘Windows cannot be installed to this disk’. It will ask you to change your USB disk scheme to GPT because the USB bootable set up for the MBR partition scheme cannot be used to install Windows 10 on a GPT-style disk.

If you are wondering about the differences between the two, GPT is a modern partitioning scheme and is necessary if you are booting your Windows operating system in UEFI mode. On the other hand, MBR is intended for booting older versions of Windows in BIOS mode. If you want to install the latest Windows 10, you may need to use the GPT partition scheme.

How to Check MBR or GPT in Windows 10 PC Laptop

You need to know the disk partitioning scheme before setting up a bootable USB drive to ensure an error-free installation of Windows 10. So, it is best to find out if the Disk drive is using GPT or MBR on your Windows 10 computer.

This time, we will discuss some of the best methods to check if a disk is using GPT or MBR. Okay, let’s go straight to the discussion of how to check MBR or GPT in Windows 10.

#1. Via Disk Management

Via Disk Management

You can use Windows 10’s built-in Disk Management utility to find out if the disk is GPT or MBR. Follow some simple steps given below.
1. First right-click on the Start button and select ‘ Disk Management ‘ to open the Disk Management tool.
2. After the Disk Management tool opens. Right-click on the disk on the left (usually the name is Disk 0 or Disk 1 ) whose partition scheme you want to know and select ‘ Properties .’
3. In the next window, select the ‘ Volume ‘ tab.
4. Now check the Partition style section, it will tell you about the partition scheme used on the disk.
#2. Using Command Prompt

The Command Prompt method may not be the easiest, but it’s still quite effective. Follow some simple steps given below to check if the disk is using GPT or MBR partition style.

Using Command Prompt
1. First of all, click on Windows search and search for CMD. Right-click on CMD and select ‘ Run as administrator ‘.
2. At the Command Prompt, enter the command ‘ diskpart ‘ and press the Enter key.
3. Next, enter the command ‘ list disk ‘ at the Command prompt and press the Enter key.
4. If the disk is GPT, it will have an asterisk character (*) under the GPT column. If the asterisk character is missing from the GPT column, it is an MBR disk.
#3. Using Powershell

Like the Command prompt, you can use Windows Powershell to determine whether the disk drive uses a GPT or MBR partition style.

Using Powershell
1. First of all, search for Powershell in Windows search. Now right-click on Powershell and select ‘Run as Administrator.’
2. In Powershell, type ‘ Get-Disk ‘ and press Enter key.
3. Now, look at the ‘ Partition Style ‘ column. The column will list whether the disk drive uses the GPT or MBR scheme.
Read more:
Conclusion:

So that’s how to check MBR or GPT in Windows 10. Now you know how to check the partition scheme or type you have on the Windows 10 operating system and you can now determine which partition scheme is suitable to use when booting your USB drive.

Don’t forget to bookmark and always visit every day Technowizah.com because you can find here the latest Tech Computer Android games How-to Guide Tips&Tricks Software Review etc, Which we update every day.
July 14, 2024
20 Ways to Fix 100% Disk Usage on Windows 10 PC 2024
20 Ways to Fix 100% Disk Usage on Windows 10 PC – Getting 100% disk usage on Windows 10, will make the computer hang and freeze. Find your system drive running at 100%. Surely this is impossible, right? In fact, the latest versions of Windows have issues with overworked drives, which slow down the operating system.

20 Ways to Fix 100% Disk Usage on Windows 10 PC

How to Fix 100% Disk Usage on Windows 10 PC Laptop 2024

This issue affects both hard disk drives (HDDs) and solid-state drives (SSDs). But you guys take it easy, there are some fixes available to overcome 100% disk usage. But first, you need to know the cause of the problem.

Read more:
#1. Check Using Task Manager

This performance issue is most obvious when trying to use Windows Search to find a file or program, and anything else that requires the drive to do some work (perhaps copying and pasting a group of files).

To determine if this is an issue affecting you when your computer is slowing down press Ctrl + Alt + Del and select  Task Manager (Alternatively,  right-click on the  Taskbar and select  Task Manager ).

Check Using Task Manager

On the first tab,  Processes,  look for the Disk column. If you’re having issues with drive performance, it should be 100% and shaded in red to indicate whether or not you have a problem.

Troubled sectors on your HDD can cause 100% disk usage issues in Windows 10. However, using Windows built-in disk check can fix it.

Open Windows Explorer and select  This PC, then identify your hard drive. Right-click on C: and select  Properties. Here, look for the Tools tab, and under Error-checking click on Check.

In the resulting window, click  Scan drive. Wait while the system scans the drive. A reboot may be required for a full disk repair. It has to deal with errors.

#2. Scan Using Anti-Virus Apps

As with any performance issue, the first thing to do is to confirm that your computer has not been infected with malware. Your security software should be able to handle this, whether it’s a free or a paid app.

At the very least, a tool like Malwarebytes Anti-Malware should be able to scan your system drive and detect any issues, although, with a heavy load on your drive, this may take some time.

If a threat is found, use the recommended software to remove it and reboot. Next, check the performance of your drive further. Hope you guys have solved this problem, if not then malware is not the cause so read on.

#3. Perform a Clean Boot on Windows 10

Clean Boot State is used to diagnose and troubleshoot advanced Windows problems. “Clean Boot” starts Windows with a minimal set of drivers and startup programs so you can determine if background programs are interfering with your system’s performance. If you have never done a clean booth, now is the time to learn.

Use Win + R to open the run box, then type MSConfig and press “ Enter ” to open “System Configuration.”

Click the “ General ” tab, then click “ Selective Startup ” Clear the “ Load Startup Items ” checkbox, and make sure “ Load System Services ” and “ Use Original boot configuration ” are checked.

Perform a Clean Boot on Windows 10

Click the ” Services ” tab. Select the “ Hide all Microsoft services ” checkbox. Select the item and then select “ Disable all “.

Perform a Clean Boot on Windows 10

Click “ Apply/OK ” and restart the computer. This will put Windows into a Clean Boot State.

If you find that everything loads fine on a clean boot, then slowly enable each startup program one by one until you determine which program is causing the slowdown. You can then delete or disable it. For starters, always start by disabling third-party anti-virus/anti-malware programs as those programs can have a tendency to access the disk at any time.

#4. Uninstall Anti-Virus Applications If You Use Windows Defender

By default Windows 10 has a security application for its operating system, namely Windows Defender. But often users install third-party anti-virus applications, this is good for keeping your privacy safe. But this will be a problem if the computer/laptop used has outdated components.

This can lead to excessive disk usage and many other problems. As a result, this can also be the cause of 100% disk usage in your Windows Task Manager. Consider removing an antivirus or anti-malware program like Norton, Kaspersky, AVG, Avast Behavior Shield or Malwarebytes, etc.

#5. Disable Windows Search For Improved Disk Performance

The next thing to check is whether the disk usage 100% error has something to do with Windows Search.

A bug in Windows 10 resulted in a “search loop” which caused an increase in the load on the system drives.

To stop this and prevent it from happening open  Windows PowerShell (Admin). You will find this by right-clicking the  Windows 10 Start menu.

Enter the command:
```
HKEY_net.exe stop "Windows search"
```
To permanently disable Windows Search or Indexing, press WIN + R, enter services.msc, and press Enter. In the Services window that opens find the Windows Search entry and double-click it to open the Windows Search Properties window.

Disable SysMain To Fix 100% Disk Usage in Windows 10

Under Startup type, select Disable. Here you can click Stop to cancel the service. Click OK to save your changes.

Sometime after disabling Windows Search, your Windows 10 performance will improve greatly. If not, continue…

#6. Disable SysMain To Fix 100% Disk Usage in Windows 10

Another Windows 10 feature identified as a potential cause of the 100% disk usage issue is the superfetch service. Since Windows 10 1809 (Windows 10 October 2018 Update) it has been renamed to “SysMain.”

To prevent this service from causing disk usage issues, open another Windows PowerShell (Admin) and enter:
```
net.exe stop sysmain
```
Disable SysMain To Fix 100% Disk Usage in Windows 10

Again, wait a while to check if this has any impact on your computer’s performance. You should also run Check Disk:
```
chkdsk.exe /f /r
```
You will be notified that your PC must be rebooted for Check Disk to complete, so make sure you have closed all your applications first.

Or you can use the third-party software  AOMEI Partition Assistant Standard, which simplifies things in a few clicks. With this tool, you can check a single partition, or check the entire disk.

This software allows you to check based on the partition and disk type according to your situation. No bundled devices and 100% clean. If this doesn’t work, continue to the next step.

#7. Check Is Flash Causing 100% Disk Usage Bug?

Flash remains one of the most vulnerable aspects of modern computing and should be disabled. Adobe plans to shut down multimedia plugins in 2020, so there’s little reason to stick with it.

Flash also seems to be one of the most common causes for 100% hard disk usage on Windows 10 if you use the Google Chrome browser.

Go to  Menu > Settings > Privacy and security and click the section marked  Site Settings. Here, search for Flash and set the switch to  Block sites from running Flash, then click  Back.

Check Is Flash Causing 100% Disk Usage Bug

Restart the browser and check your HDD performance.

#8. Use the Control Panel To Delete All Web Browsers

Maybe it’s not Flash that affects your browser’s performance. Another cause could be the browser itself.

You can use Control Panel to delete all browsers, except Edge and IE (Internet Explorer). Uninstalling the browser is an effective way to isolate issues with plugins.

Otherwise, you will need to remove the plugins one by one from each browser and test them. Adobe Flash and Shockwave Player are the usual culprits of 100% disk usage on Windows 10.

Fortunately, the browser can be reinstalled in seconds. After uninstalling the browser, please delete files including ‘Temp’, ‘%Temp%’, and ‘Prefetch’. After that, restart the system and check if the problem is solved. If it does, wait 10-15 minutes to verify that it doesn’t reoccur, and you can reinstall the browser.

#9. Fix 100% of Disk Usage Due to Skype

Another widely used app that can also cause 100% of your HDD usage: is Skype.

To find out and disable its OTT resource requirements, start by checking if the software is not running. You can do this by looking in the Task Manager, or checking the System Tray. If Skype is running here,  right-click the icon and select  Quit.

Next, press  WIN + R  and paste this address into the box:
```
C:\Program Files (x86)\Skype\Phone
```
Click  OK  to find the Skype.exe file and right-click this and select  Properties. On the Security tab click  Edit, then select  ALL APPLICATION PACKAGES.

Fix 100% Disk Usage Due to Skype

Put a checkmark next to Write in the Allow column and finish by clicking Apply, then OK. Return to Task Manager to see the changes. No difference? Keep reading…

#10. Fix StorAHCI.sys Driver Driver

Some drivers don’t run well enough in Windows 10. One that has been found to be causing 100% HDD usage is the StorAHCI.sys driver, which has a firmware bug. StorAHCI.sys is intended for storage devices connected to a PC or laptop motherboard via the Advanced Host Controller Interface PCI-Express. If you have gone so far without success, this could be the cause of the problem.

Open  Device Manager (use Windows 10 search, or right-click This PC  in Windows Explorer, then  Properties>Device Manager  ) and expand  IDE ATA/ATAPI Controllers. If the AHCI Controller entry is listed, double-click it, then go to the Driver tab and select  Driver Details.

Fix StorAHCI.sys Driver Driver

Is the driver listed as  C:\Windows\system32\DRIVERS\storahci.sys? If so, you may be affected by this bug.

Fix StorAHCI.sys Driver Driver

Close the driver details box and switch to the Details tab, select the Device instance path from the drop-down menu. Where Value is listed, right-click, and select  Copy. Run your text editor (like Notepad) and  Paste in the content.

Fix StorAHCI.sys Driver Driver

Next, press  WIN + R and type Regedit, followed by the OK button. Navigate to this address:  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\  and use the pasted string above to open the correct AHCI Controller, followed by a random number.

Fix StorAHCI.sys Driver Driver

After finding the correct AHCI Controller, then navigate to Device Parameters\Interrupt Management\MessageSignaledInterruptProperties.

Fix StorAHCI.sys Driver Driver

There you will see supported MSIS listed in the right pane. Double-click this, then change the Value data: to 0. Click  OK  to confirm and follow the instructions to restart Windows.

Fix StorAHCI.sys Driver Driver

#11. Clear Steam Cache?

Enjoy the game and have Steam installed? There is a high chance that this digital sending system is causing 100% disk usage.

Usually, this is due to update delivery, causing the background downloader to get stuck in a loop. Clear the Steam cache to fix it.

First, make sure you have logged out of Steam. Where Steam is the likely cause of the 100% disk usage error, it may hang when you try to exit. In this case, use Windows 10 Task Manager to close the software. Next, open the run box by pressing the WIN + R keys  and enter
```
steam://flushconfig
```
Clear Steam Cache

You will see a dialog box, notifying you that the content will be deleted.

Click OK to continue. Note that games and saves will be preserved, so there is no risk of being deleted.

#12. Disable Diagnostic Tracking In Windows 10

Finally, it’s worth considering the impact of diagnostic tracking on Windows 10. A feature you may have disabled for privacy reasons, as it causes 100% HDD usage on many PCs.

In terms of reducing hard disk drive usage, it is quicker to disable the DiagTrack service. If this is the source of the 100% disk usage error in Windows 10, you can stop the service from launching.

However, to do this, you have to access the Command Prompt in administrator mode.

Do this by clicking Start and typing cmd in the search box. Wait for the results and right-click Command Prompt, and select Run as administrator.

Enter this command to disable and stop DiagTrack:
```
sc config "DiagTrack" start= disabled
sc stop "DiagTrack"
```
Disable Diagnostic Tracking In Windows 10

Additionally, you might also go to Settings > System > Notification & actions and disable Get tips, tricks and suggestions as you use Windows. Doing so has been shown to improve things.

#13. Windows Update Can Cause 100% Disk Usage

Windows Update Can Cause 100% Disk Usage

Apart from affecting the changes you make to your PC while fixing the 100% disk usage issue, Windows Updates can also be the cause. This usually only happens when Windows Update has a problem (which is usually caused by a file refusing to download). You have two options here:
1. Let the computer Update Automatically — close all your open applications and wait. Eventually, the file will be downloaded, but depending on how Windows Update is scheduled on your computer, it may require a reboot.
2. Shut down your computer— once you’ve done that, restart it and wait for Windows Update to resolve the issue.
Once the update has finished downloading, we recommend running it as soon as possible. Remember to check the previous fix for 100% disk usage before proceeding, as noted above.

#14. Reset Virtual Memory

Virtual Memory is a combination of RAM and hard disk space and can be responsible for overusing your HDD. If there is not enough RAM to perform the task, HDD is used to increase RAM. Data that is moved to the HDD is then returned to RAM when needed.

If you’ve come this far and you haven’t solved the 100% disk usage issue, it might be a good idea to reset your Virtual Memory.

Go to the System screen with  Windows + Break/Pause, then  Advanced System Settings on the left. In the resulting box, select the Advanced tab, then under Performance click Settings.

Here you will find another Advanced tab, which has a section labeled  Virtual memory. Click  Change and clear the checkbox to Automatically manage the paging file size for all drives.

Reset Virtual Memory

Staying at this screen, select your Windows drive (usually C 🙂 and then  Custom size. Here, add the Initial size and  Maximum size. Note both are measured in MB rather than GB.

These numbers can be confusing, so with the first value, rely on the suggested options. For the maximum value, aim for a number no more than 1.5 times your system RAM.

For example, a computer with 4GB of RAM should have no more than 6.5GB (6144MB). With the value input, click  Set, then  OK  to continue. You now need to delete the temporary files that have been used in the previous virtual memory allocation.

Do this by opening the Run box (  Win + R ) and then entering “temp”. When the temp directory opens, select all files ( Ctrl + A ) and tap  Delete on your keyboard.

#15. Enable High-Performance Mode

One last thing to try is changing your Windows power settings. The standard power mode is more prone to the 100% disk usage bug but switching to high performance often fixes the problem.

The downside, of course, is that your computer will use more power. Thanks to the modern processor design this shouldn’t be a big problem. However, desktop replacement notebooks and laptops can affect battery life.

To change to high-performance mode, open the Power & sleep screen with WIN + X > Power Options. Here, click  Additional power settings, select  High performance, then  OK.

Enable High-Performance Mode

If this is not the option shown, you will have to create your own custom power plan. Click  Create a power plan, then select High performance. Name the plan, set the personal settings you need, and select it as the power plan to use. In a few moments, the 100% disk usage issue will drop to less than 10%.

#16. Install the Latest SATA Drivers

Your Windows 10 computer will almost certainly use a SATA connection for hard drives, SSDs, and optical drives. If the drivers are not up to date, disk usage errors may occur. Avoid this by upgrading to the latest SATA drivers.

Open the Power User menu with  WIN + X  and select  Device Manager. From here, expand  Storage controllers, then identify the correct controller for your SATA device. If you can’t do this, don’t worry about updating both.

To update,  right-click on each controller and select  Update driver.

Install the Latest SATA Drivers

Select the Browse my computer for driver software option, then  Let me pick from a list of available drivers on my computer. Here, select  Standard AHCI Controller and see how it affects performance.

You may need to reboot Windows for this to take effect. Note that if it doesn’t work, you can still try this by checking the manufacturer’s website for new drivers. It can be installed using the instructions that came with it or you can use a third-party app like Driver Booster.

#17. Firmware Upgrade For SSD

Firmware Upgrade For SSD

If you have an SSD installed on your machine and are experiencing 100% disk usage issues, it’s most likely a firmware issue. SSDs are very fast and unless you have some program accessing your disk all the time, they shouldn’t be at 100% for more than a few seconds. Here are some links to SSD firmware updates for some of the major brands: Crucial,  Samsung,  Kingston,  Intel, and OWC.

#18. Replace/Upgrade the Hard Disk

ReplaceUpgrade Hard Disk

A hard disk that develops too many bad sectors on it will mostly send your computer into a loop with high disk usage. Or, your computer’s hard disk may be too old to function properly, even though there is a lot of unused space.

However, your computer works like a turtle and consistently reports 100% disk usage. If your motherboard supports the use of an SSD, I suggest you use an SSD, you will see a very drastic difference between the two, so you don’t want to go back to using a hard disk anymore.

#19. Upgrade RAM

Another thing you should check is to see how much RAM you have installed on your computer. Because Windows 10 can run on older devices. This is fine, but you need to make sure your computer has a decent amount of RAM, which means no less than 4 GB.

You can also open Task Manager and click on  Performance then click on  Memory.

Upgrade RAM

As you can see, the admin has 4 GB of memory and about 3.5 GB is in use. This means if you have 2 GB of RAM on your computer, all the memory will be exhausted. Everything that cannot be entered into memory is mapped to the hard disk. So basically Windows will use your hard disk as a temporary memory device.

If you have a lot of data to write to disk, it will cause your disk usage to spike and your computer to slow down. If you notice that the line in this graph is close to the top, then it means that you may need to upgrade the RAM in your computer.

#20. Replace the PC Power Supply (PSU)

Replace the PC Power Supply (PSU)

There is a possibility that your computer hardware is causing the 100% disk usage problem in Windows, especially the PSU. If the disk usage issue can be attributed to excessive disk activity, then there may be a power-related cause. 100% disk usage has been seen on a Windows 10 laptop running on battery. Once plugged into the power adapter, the problem was solved. Similarly, the problem has been shown to subside once a new PSU is installed in a desktop PC.

Read more:
Conclusion:

Simply put, there is little reason for your disk loading to be anywhere near 100%, certainly not under normal use. A slow computer is a computer with a problem, and if you can’t fix it by disabling browser plugins, stopping the service, or you’ve confirmed that there are no viruses on your computer, then the problem may be hardware related.

Maybe your drive is getting old, it may be damaged, or the cable may need to be replaced. Alternatively, it is possible that the problem is connected to the Windows defrag tool. But I still hope that hopefully, one of the solutions above will work for you guys.

Don’t forget to bookmark and always visit Technowizah.com every day because you can find here the latest Tech Computer Android games How-to Guide Tips&Tricks Software Review etc, Which we update every day.
July 7, 2024